
Rollei Deal
Get 15% off almost all Rollei products.
Valid from October 26 through December 7, 2026
- GND8 with a density of 0.9 and 3 stops in the upper and lower areas
- Compensates for differences in brightness in the upper and lower image area (e.g. water and sky)
- Compatible with Rollei 100 mm rectangular filter holder systems
- Ultra-fine coating for razor-sharp images - even with 150 MP high-end cameras
- Impressively clear images thanks to high freedom from reflection
- Extremely hard surface coating for optimum protection
- Diagonal 39.5 cm
- 1920 x 1080 pixels
- Stylish black border
- Flexible transfer: From Frameo app, memory card, USB memory or computer
- Large memory: 32 GB internal memory for thousands of photos and videos
- High-quality display: 15.6-inch screen diagonal, Full HD resolution, IPS panel and touchscreen
- Many functions: Labeling, graphic frame, clock, weather and sleep mode
- Flexible placement: standing or hanging in landscape or portrait format
- Rollei Lumis Slim LED - RGB LED permanent light
- slim LED RGB light
- with built-in rechargeable battery
- with 396 LEDs (132 white light, 132 warm light, 132 RGB)
- 3 modes applicable: CCT, RGB and effect mode (7 effect types with 3 variations each)
- high-quality aluminum housing
- intuitive and simple operation
- long battery life
- Adjustment of the color temperature (3200 - 5600 K)
- Color values (0 - 360°)
- infinitely adjustable, 1 - 100
- Lumen Flex Frame M
- Dimensions assembled: 68 x 34 cm
- Length of individual struts: 35.5 cm (long strut, 2x )
- 32.5 cm (short strut, 4x)
- Weight: 360g
- Material: Aluminum alloy
- Replacement battery for plenty of power
- Up to 500 flash fires with a fully charged battery
- Use the studio flash cordlessly—ideal for outdoor use
- Includes battery level indicator
- Easy to insert into the flash
- Compatible only with the Rollei HS Freeze 4 studio flash
- Original quality: Developed for maximum reliability
- Optimum performance: Perfectly matched to your flashes
- Quickly ready for use: Ready for your creativity at any time
- Rollei F:X Pro Center GND8 gray graduated filter 100 mm rectangular filter
- centered graduated filters are used to darken the brightest area in the center of the image, e.g. for
- Sunrises and sunsets
- ultra-fine coating ensures razor-sharp images - even with 150 MP high-end cameras
- exemplary color fidelity - capturing nature as the eye sees it
- impressively clear images thanks to approx. 99.5% freedom from reflection
- diamond-like scratch resistance - extremely hard surface coating for optimum protection
- extremely temperature-resistant - tested in scorching heat and freezing cold
- Gray gradient filter Center IR GND8
- Optical density 0.9
- F-stop reduction 3 stops
- Material Gorilla Glass
- Set with two filter clamps each for round filters
- Diameter 62 mm - 77 mm and 49 mm - 58 mm
- the lever effect makes it easier to release the filters
- Rollei F:X Pro Medium GND8 gray graduated filter 100 mm rectangular filter
- medium graduated filters are used for difficult image compositions where you actually need a hard and soft gradient
- ultra-fine coating ensures razor-sharp images - even with 150 MP high-end cameras
- exemplary color fidelity - capturing nature as the eye sees it
- impressively clear images thanks to approx. 99.5% freedom from reflection
- diamond-like scratch resistance - extremely hard surface coating for optimum protection
- extremely temperature-resistant - tested in scorching heat and freezing cold
- Gray graduated filter Medium IR GND8
- Optical density 0.9
- F-stop reduction 3 stops
- Material Gorilla Glass
- Spare parts set for Rollei C6i Carbon and C6i Aluminum tripods
- for replacing the stopper plates for one tripod leg
- Studio flash reflector
- For strong illumination of subjects with hard light and hard shadows
- Internal silver coating ensures good light reflection
- Easy to transport
- 55° beam angle
- Compatible with flash units that have a Bowens connection
- practical screw set for various applications
- suitable for tripods, lamp tripods, monopods, tripod heads, cameras and camera accessories
- made from high-quality metal for a long service life
- Filter case for the Rollei 100 mm rectangular filter system
- with blank label for labeling
- Label window on the filter case
- Adapter rings for Rollei 100 mm rectangular filter holders
- made of lightweight aluminum
- Rollei filter gasket 100 mm
- suitable for filters with the dimensions 100 x 100 mm
- simple gluing of the filter seal over the adhesive surface
- Material: sponge rubber
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
